Solutions > Norske Ventiler
Norske Ventiler Valves
PMIS is the US/Canadian distributors for Norske Ventiler. Norske Ventiler's
valves are produced from round bar to valve or customer specifications and
while the production method causes a higher material cost, the flexibility
results in shorter delivery times.
Norske Ventiler manufacturers valves from 0.5" to 4" in pressure
ranges from 150# to 2500#. Materials include Duplex in all its forms, Titanium
Grades 2 and 5, 6Mo and 904, Monel and Ni/AL Bronze, Hastelloy, Inconel, and
more.
<Download
Norske Ventiler's PDF brochure>
 |
Ball valves
Soft seat ball valves
PEEK, PTFE, POM or PTFE+25% carbon
Packing as requested in either graphite or Lip Seal
Metal-to-metal seated ball valves in 1" to 3" range |
|
 |
Gate & Globe Valves
WN, RF, NPT or different
Chesterton packing so the stem moves easier
Seal rings; Nitril, Viton or ED-proof
Wedge in Stellite No.6
Wheel in SS316
|
|
 |
Double Block & Bleed Valves
All kinds of shapes and sizes
Also with gate/globe, gate/gate, ball/ball
Flanges specified by customer
New flange, compact flange
Seal rings and packing delivered as requested
|
|
 |
Needle Valves
Bleed plug, hexhead plug or both
Endings are normally NPT, SW or BW
Standard needle valves
All components in all material qualities
|
|
 |
Other Valves
Air Release valves with/without top bend
Normally produced in 2”
Check valves with flanges as requested
Dual check valves up to 12” |
titanium
- duplex - super
duplex - 6%
moly - stainless
steels - nickel
alloys
tubing
- pipe
& pipe fittings - round
bar - plate/sheet
- flanges
- valves
- specialty
forgings