• Pressure balanced design.
• Sizes from ½" to 36".
• Classes:  #150 to #2500.
• Up to 30° seating area.
• Fully protected seating area.
• Few moving parts.
• Primary seals: metal to metal.
• Secondary seals: lubricant.
• Minimal body cavities.
• End connections as desired (Flange, Clamp, Welding ends etc...).
• Broad selection of materials.
• 90° turning of the plug to open/close.
• Low operating torque.
• Direct or worm gear operation.
• Vertical or horizontal gear - operating stem.
• Can be installed in any position required.

• Standard face to face dimensions for Class 900 (API 3000) and upwards allowing for easy retrofit.
• Space and weight saving true compact design.
  Primary seals: metal to metal.
• Secondary seals: lubricant.
• Double block and bleed.
• Two independent closing members.
• Blow-out proof stem with tree unique seals.
• Protection against overpressure in internal cavities.
• Excellent flow characteristics.
• Fire safe tested (acc. to API 6FA and BS 6755).
• All standard sizes and pressure stages/classes.
• End connections as desired (Flange, Clamp, Welding ends etc...).
• Broad selection of materials.
• 90° turning of the plug to open/close.
• Low operating torque.
• Direct or worm gear operation.
• Vertical or horizontal gear - operating stem.
• Can be installed in any position required.

Seguro Resilient Seated Gate Valve

The Seguro valve was introduced to the market in 1972 and represents a well proven concept in gate valve design, it is unique in that the sealing of the gate valve is effected by a soft rubber seal, firmly secured by a special wedge. The Seguro is today manufactured in sizes upto 64" or 1600 mm.

 The wedge is guided by grooves, cast into the valve body. Because Seguro has no seat rings in the body, a smooth full bore is achieved. This, plug the self flushing design of the valve body, eliminates possible build-up of sediments or other foreign matter in the valve body. The result is a minimum of maintenance and 100% tight closure.

The packing gland has been replaced by with a double o-ring seal embedded in nylon. Valves with rising stem uses U-packings in the brass bushing. This design assures positive seal at the stem and minimizes maintenance.

 The above features, combined with the simple sound engineering practices, assure an ideal shut-off for allmost all installations and media. Thus resulting in 100% closure, high reliability in service and long life with a minimum of maintenance makes the Seguro the logical choice for economical and trouble free service.